Engineering Graphics II
Assignments
The following assignments will be
due by the end of the third quarter. The assignments should be passed in as
packets stapled together with a cover sheet listing student name, name of
assignment and the drawing numbers.
Orthographic
Drawing Handout - Drawing number 5-41 through 5-46. Drawings should be drawn
with top, front and side view on a 8.5" x 11" paper with a border.
Drawing needs to be centered in border with dimensions.
(6 Drawings) See Example
Two
View Drawings - Drawing number 5-80 through 5-85. Drawings will be done with
either two or three views - student is to determine which views are necessary.
Plot drawings so they fit on a 8.5" x 11" paper. Drawings must be
dimensioned. (6
Drawings)
Isometric
Drawing Handout - Drawing number 5-41 through 5-46. Drawings should be drawn as
isometric (3D) on a 8.5" x 11" paper. (6 Drawings)
(TEST) - Bookshelf - Handout. Draw as Isometric by
using an orthographic drawing. Print as
solid. See Assignment
Two View Drawings - Drawing number 5-86 through
5-90. Drawings will be done with either two or three views - student is to
determine which views are necessary. Plot drawings so they fit on a 8.5" x
11" paper. Drawings must be dimensioned. (6 Drawings) See Assignment
(TEST)
- Weather Instrument - Drawing number 2-39 on handout. Draw and dimension. (1 Drawing) See Assignment
The above drawings due by
Complete
section 20 (Slide Block, Clamp Slide) and 22 (45° Elbow) from the CADKEY 19
workbook. Do each drawing plus any extra credit challenges. (3 Drawings)
Create
either a Working Drawing of the Universal Joint (handout) Fig. 11-41. with
either 2 or 3 views of each part with dimensions OR - model the part as a solid
that has been assembled. (1 Drawings) See
Assignment
Choice
- Working drawing and 3D model of FOUR of the items in the brown bag in the
black filing cabinet. You will need to measure the actual object using the
micrometer.