Engineering Graphics Class
Second Quarter Assignments
The following assignments will be
dueby the end of the second quarter. The assignments should be passed in aspackets
stapled together.
Section13
- Drawing #12 from workbook & Extra Credit Challenge & extrudedrawing
#9 from section 10 along with the two extra credit challenges to athickness of
.75 inch. See
Example
(5 Drawings)
Createa
castle. See Example Create the castle by using the Solids. Use the basic solidprimitives
to create the shape of the castle. Please reference each primitivefrom 0, 0, 0.
Section15
- Drawing #14 Guide Block from workbook & Extra Credit Challenge. SeeExample
(2 Drawings)
Create3"
square tic-tac-toeboard and a triangle
peggame board.
(2 Drawings)
The above assignments
aredue by May 1
Section16
- Drawing #15 Sliding Guide from workbook & two Extra Credit Challengeand
drawing #31, #32 and #35 from the 3-view assignments. Handout
with #31, #32 and #35
(6 Drawings) SeeExamples
Section17
- Drawing #16 Dovetail Slide from workbook & two Extra Credit Challenge. SeeExamples
(3 Drawings)
The above assignments are
due by May 21
Workingdrawing of Deck
Cannon - Draw each part using CADKEY and add dimensions.
Handout - Connecting Rod drawn as 3D model. See Examples
SENIORS – DRAWINGS LISTED
BELOW ARE NOT REQUIRED!
Section 18 - Drawing #17 Locator & Drawing #18 Sliding Jig
from workbook with the two extra credit challenges - Object and Filler. SeeExamples
Section 19 - Drawing #19 Holder Block & Extra
CreditChallenge. SeeExamples
Step Pulley – Create a 3D modelof the step
pulley – See
Examples
Weather Instrument – Create a detailed
drawing of the weather instrument – See Example
The above assignments are
due by June 11 – Last day of Quarter